Products

A sprocket, sprocket-wheel or chain wheel is a profiled wheel with teeth that mesh with a chain, track or other perforated or indented material.The name 'sprocket' applies generally to any wheel upon which radial projections engage a chain passing over it. It is distinguished from a gear in that sprockets are never meshed together directly, and differs from a pulley in that sprockets have teeth and pulleys are smooth except for timing pulleys used with toothed belts.We Ningbo Zhiye Mechanical Components Co.,Ltd. is a leading manufacturer of water Glass Investment Casting for Sprocket wheel Products in China,which have been exporting different foreign countries for many years. Sprockets are used in bicycles, motorcycles, tracked vehicles, and other machinery either to transmit rotary motion between two shafts where gears are unsuitable or to impart linear motion to a track, tape etc. Perhaps the most common form of sprocket may be found in the bicycle, in which the pedal shaft carries a large sprocket-wheel, which drives a chain, which, in turn, drives a small sprocket on the axle of the rear wheel. Early automobiles were also largely driven by sprocket and chain mechanism, a practice largely copied from bicycles.Our Company has all ranges of equipment and facilities,which can reach to your products demanded. Sprockets are of various designs, a maximum of efficiency being claimed for each by its originator. Sprockets typically do not have a flange. Some sprockets used with timing belts have flanges to keep the timing belt centered. Sprockets and chains are also used for power transmission from one shaft to another where slippage is not admissible, sprocket chains being used instead of belts or ropes and sprocket-wheels instead of pulleys. They can be run at high speed and some forms of chain are so constructed as to be noiseless even at high speed.

Silica Sol Lost Wax Investment Casting,Lost Foam Casting Process,Water glass Casting,Soluble Glass Casting,Hot Forging parts,Hot Forged parts,Cold Forging parts, Cold Forged parts,stamping,anodizing parts,Automobile Suspension Spare Parts,Casting gray iron parts,Casting malleable iron parts,Casting copper parts,Stainless Steel Silica Sol Investment Casting for Fuel Pipe Adapter Casting aluminium parts,Stainless Steel Anchor Bow Roller,Stainless Steel Anchor Chain Swivel,Stainless Steel Anti Rattle Fastener,Stainless Steel Blue Water Cleat,Stainless Steel,Bollard,Stainless Steel BRUCE ANCHOR,Stainless Steel Chock,Stainless Steel Coat Hook,Stainless Steel Deck Filler,Stainless Steel Fittings,Stainless Steel Hinge,Lifting Pull Ring,Locker Vent,Stainless Steel 316 Cap.

What is Carbon Steel Casting ? Ningbo Zhiye Carbon steel is an iron-carbon alloy with a carbon content of 0.0218% to 2.11%. Also called carbon steel for casting. It also generally contains small amounts of silicon, manganese, sulfur, and phosphorus. The higher the carbon content, the higher the strength and the hardness. Carbon steel is among one main materials in the world of steel castings.So Carbon Steel Sol Investment Casting for Machinery products of our company are widely used attracting many customers from all over the world.

Stainless Steel Silica sol investment casting of Ningbo Zhiye Mechanical Components Co.,Ltd., as its name implies, is a casting technique that adopts silica sol investment molds for casting manufacturing. Silica sol investment mold is a kind of casting mold that takes silica sol zircon sand as molding materials. First, make wax molds (fired molds) with fusible paraffin and stearic acid. And then coat the wax molds with silica sol zircon sands and refractory powder to make mud molds. Dry the mud molds out and put them into hot water to melt the wax molds inside. When the wax molds inside are completely melted, take them out, fire them into ceramic molds and silica sol investment molds are manufactured. When the ceramic molds are fired, a sprue gate must be reserved to allow molten metal flow in. Cool the molten metal down and castings are produced.

Wholesale quality Alloy Steel Silica Sol Investment Casting. Zhiye a Alloy Steel Silica Sol Investment Casting manufacturer and supplier in China. Alloy steel precision investment castings have high dimensional accuracy and clear external contours; the castings have smooth surface and good appearance quality Precision investment castings have many advantages: they can produce castings with complex shapes, and can produce small-hole thin-walled parts.

Shell mold casting is a casting method to produce castings with thin shell mold, also it’s ideal for medium-to-high-volume production. Similar to the sand casting, in that molten metal, a dispensable mold is poured. Shell casting was invented by German J. Cronin in 1943. It was first used in Germany in 1944 and began to be used in other countries after 1947.At present,our company Ningbo Zhiye Mechanical Components is widely used this Shell Mold Casting for Intake Rockers.